U.S. stocks rose, sending the Standard & Poor�� 500 Index to a record, as Amazon.com Inc. (AMZN) and Microsoft (MSFT) Corp. sales beat estimates while a drop in consumer confidence added to speculation the Federal Reserve will delay scaling back monetary stimulus.
Amazon.com surged 9.4 percent as consumers flocked to the largest online retailer ahead of the holiday shopping season, helping to curtail losses. Microsoft jumped 6 percent as the company relied on corporate software demand to make up for weak consumer personal-computer purchases. Eastman Chemical Co. slumped 5.2 percent after cutting its full-year forecast.
The S&P 500 rose 0.4 percent to 1,759.77 at 4 p.m. in New York. The Nasdaq 100 Index climbed 0.6 percent to 3,383.83. The Dow Jones Industrial Average added 61.07 points, or 0.4 percent, to 15,570.28. About 6 billion shares changed hands on U.S. exchanges, in line with the three-month average.
��arnings have been good enough and the liquidity spigot is open so that people see very little risk in the system,��Charlie Smith, chief investment officer of Pittsburgh-based Fort Pitt Capital Group Inc., said in a phone interview. His firm oversees $1.5 billion. ��t�� like a giant game of musical chairs. The attitude on the part of most investors is that they have to play while the Fed got the music going.��
Best Telecom Stocks To Watch For 2015: Koninklijke DSM NV (RDSMY.PK)
Koninklijke DSM N.V. (DSM), incorporated on December 28, 1966, is engaged in creating products and services in Life Sciences and Materials Sciences. DSM�� products and services are used in a range of markets and applications. End markets include human and animal nutrition and health, personal care, pharmaceuticals, automotive, coatings and paint, electrical and electronics, life protection and housing. The activities of DSM are grouped into five clusters: Nutrition, Pharma, Performance Materials, Polymer Intermediates, and Base Chemicals and Materials. In May 2010, Orascom Construction Industries announced that the acquisition of the Company�� agro and melamine businesses has been finalized. DSM completed the disposal of DSM Energie Holding B.V. (DSM Energy) to TAQA Abu Dhabi National Energy Company PJSC on September 30, 2009. In September 2010, the Company acquired Microbia, Inc. from Ironwood Pharmaceuticals, Inc. In December 2010, the Company completed the sale of DSM Special Products B.V. to Emerald Performance Materials. In February 2011, the Company completed the acquisition of Martek Biosciences Corporation. In May 2011, the Company sold DSM Elastomers to Lanxess AG. In June 2012, the Company acquired Kensey Nash Corporation (Kensey Nash).
Nutrition
The Nutrition cluster comprises DSM Nutritional Products and DSM Food Specialties. The nutrition and food ingredients businesses serve the food, feed, cosmetic and pharmaceutical industries. DSM holds positions in the markets for ingredients for human and animal nutrition and health. DSM Nutritional Products is the supplier of vitamins, carotenoids, nutritional ingredients, ultra-violet (UV) filters and premixes for human and animal nutrition and health. DSM Nutritional Products is organized around two entities: Animal Nutrition and Health (ANH) and Human Nutrition and Health (HNH). DSM Food Specialties is a global manufacturer of food enzymes, cultures, yeast extracts and other specialty ingredients for the food and b! everage industries.
DSM Food Specialties comprises two business units and an Ingredients Development Unit. Enzymes & Dairy Ingredients supplies a range of food enzymes for applications such as dairy, baking, fruit processing, brewing and wine, starter cultures for cheese and yogurt, preservation solutions for cheese and meat, and tests for the detection of residues of antibiotics in milk. Savoury Ingredients is a major supplier of ingredients for flavorings and flavor enhancers (such as yeast extracts) used in products, such as soups, instant meals, sauces and savory snacks.
Pharma
The Pharma cluster comprises the business groups DSM Pharmaceutical Products (DPP) and DSM Anti-Infectives. DSM is an independent supplier to the pharmaceutical industry. DSM Pharmaceutical Products is a provider of custom contract manufacturing and development services to the pharmaceutical, biopharmaceutical and agrochemical industries.
DSM Pharmaceutical Products consists of three business units: DSM Pharma Chemicals (custom chemical manufacturing services for complex registered intermediates and active pharmaceutical ingredients (APIs), including DSM Exclusive Synthesis (custom manufacturing services for the crop protection industry), DSM Biologics (biopharmaceutical manufacturing technology and services) and DSM Pharmaceuticals, Inc. (finished-dose-form manufacturing services). DSM BioSolutions focuses on custom manufacturing services based on microbial fermentation. DSM Anti-Infectives holds global leadership positions in penicillin G, penicillin intermediates (6-APA and 7-ADCA), active pharmaceutical ingredients such as semi-synthetic penicillins and semi-synthetic cefalosporins (beta-lactams), and other active ingredients, such as nystatin.
Performance Materials
The Performance Materials cluster comprises the business groups DSM Engineering Plastics, DSM Dyneema and DSM Resins. The products are used in a variety of end-use markets: the au! tomotive ! industry, the aviation industry, the electrical and electronics industry, the sports and leisure industries, the paint and coatings industry and the construction industry.
DSM Engineering Plastics is a global player in polyamides, polyesters, polycarbonates and adhesive resins. These materials are used in components for the electrical and electronics, automotive, engineering and packaging industries. DSM produces Dyneema fiber and UD (unidirectional textile sheets) in Heerlen (Netherlands) and in Greenville (North Carolina, United States) through its gel-spinning process. DSM Resins consists of four business units: DSM NeoResins+, DSM Powder Coating Resins, DSM Desotech and DSM Composite Resins.
Polymer Intermediates
The Polymer Intermediates cluster consists of DSM Fiber Intermediates. DSM Fibre Intermediates produces caprolactam and acrylonitrile, which are raw materials for synthetic fibers and engineering plastics. Other products include ammonium sulfate (a fertilizer), diaminobutane, sodium cyanide and cyclohexanone. DSM�� caprolactam production capacity is more than 600,000 tons per annum.
Base Chemicals and Materials
The Base Chemicals and Materials cluster consists of DSM Agro, DSM Melamine, DSM Elastomers and a number of activities that have been carved out from other clusters. DSM Agro produces fertilizers and is active in Northwestern Europe. DSM Melamine is a producer of melamine, used in wood-based panels and laminates for furniture and flooring. DSM Elastomers manufactures synthetic rubbers (EPDM) for use in cars and other transportation vehicles, white goods, various industrial products and construction materials and as motor-oil additives.
DSM Agro is a producer of ammonia and high-nitrogen fertilizers for grasslands and agricultural crops; products and services for responsible fertilization. DSM Agro sells about 2.4 million tons of fertilizers per year. The Base Chemicals and Materials cluster also includes! several ! activities that have been carved out from other clusters. These include Citric Acid, DSM Special Products and the Maleic Anhydride and derivatives business.
Other activities
Other activities comprise various activities and businesses that do not belong to any of the five reporting clusters. It consists of both operating and service activities and also includes a number of costs that cannot be logically allocated to the clusters. Other activities includes the DSM Innovation Center, DSM Venturing and a number of other activities, such as Sitech Services, EdeA, DSM Insurances and part of the costs of corporate activities. Sitech Services provides technological consultancy, expertise in energy and auxiliary materials, the supply of utilities and human resources.
EdeA VoF owns, operates and maintains most of the production and distribution facilities for utilities (for example steam, power and water) at the Chemelot site in Sittard-Geleen (Netherlands). EdeA VoF is a joint venture with Essent, an energy production and distribution company. DSM�� stake is 50%. DSM retains a limited part of its Property Damage and Business Interruption and Product Liability risks via a captive insurance company. DSM has a share in a limited number of associates.
Advisors' Opinion:- [By Markus Aarnio]
BioAmber expects its advanced bio-based specialty chemicals to compete with petrochemical equivalents that are proven in the market and manufactured by established companies, such as Gadiv Petrochemical Industries, Kawasaki Kasei, DSM (RDSMY.PK) and numerous small Chinese producers including Anqing Hexing Chemical, and Anhui Sunsing Chemicals. In addition, BioAmber's products will compete against other companies in the bio-based specialty chemical industry, both early stage companies, such as Genomatica (for bio-based 1,4 BDO) and Myriant Corporation (for bio-succinic acid), and established companies, such as a collaborative venture between DSM and Roquette Frères S.A. and a collaborative venture between BASF (BASFY.PK) and Purac (both for bio-succinic acid).
10 Best Chemical Stocks For 2014: Givaudan SA (GIVN)
Givaudan SA is a Switzerland-based holding company engaged in the fragrance and flavor industry. The Company has two business divisions: Fragrances and Flavors. The Fragrances business segment comprises the manufacture and sale of fragrances into three global business units: Fine Fragrances, comprising signature fragrances and line extensions, Consumer Products, comprising fabric and personal care, hair and skin care, household and air care, as well as oral care, and Fragrance Ingredients. The Flavors business division comprises the manufacture and sale of flavors into four business units: Beverages, comprising flavors for soft drinks, fruit juices and instant beverages; Dairy, comprising ice cream, yoghurt, desserts and yellow fats; Savory, covering soups and sauces, among others; and Confectionery. The Company is also engaged in research and development activities, which comprises the development of a palette of perfumery raw materials, both synthetic and natural. Advisors' Opinion:- [By Inyoung Hwang]
Berkeley Group Holdings Plc (BKG) surged 8.3 percent after saying first-half profit rose 22 percent. London Stock Exchange Group Plc (LSE) climbed 2.4 percent after Bank of America Corp.�� Merrill Lynch unit recommended buying the stock. Givaudan SA (GIVN) lost 1.3 percent after Nestle SA said it will sell $1.27 billion of shares in the world�� largest flavorings maker.
- [By Seth Jayson]
Calling all cash flows
When you are trying to buy the market's best stocks, it's worth checking up on your companies' free cash flow once a quarter or so, to see whether it bears any relationship to the net income in the headlines. That's what we do with this series. Today, we're checking in on Given Imaging (Nasdaq: GIVN ) , whose recent revenue and earnings are plotted below. - [By Celeste Perri]
Nestle SA (NESN) is selling Givaudan (GIVN) SA shares worth $1.27 billion at yesterday�� closing price to institutional investors, winding down its stake in the world�� largest flavorings maker.
10 Best Chemical Stocks For 2014: LSB Industries Inc (LXU)
LSB Industries, Inc., incorporated on January 21, 1977, is a diversified holding company involved in manufacturing and marketing operations through its subsidiaries. The Company together with its wholly owned subsidiaries owns Chemical Business and Climate Control Business. Chemical Business manufactures and sells nitrogen-based chemical products produced from four facilities located in El Dorado, Arkansas; Cherokee, Alabama; Pryor, Oklahoma, and Baytown, Texas for the agricultural, industrial, and mining markets. Climate Control Business manufactures and sells a range of heating, ventilation and air conditioning (HVAC) products in the niche markets the Company serves consisting of geothermal and water source heat pumps, hydronic fan coils, large custom air handlers, modular geothermal and other chillers and other related products used to control the environment in commercial/institutional and residential new building construction, renovation of existing buildings and replacement of existing systems. On October 31, 2012, Zena Energy LLC acquired working interests in certain natural gas properties located in Wyoming County, Pennsylvania, within the Marcellus Shale.
Chemical Business
The Company�� products in the Chemical Business include high purity and commercial grade anhydrous ammonia for industrial and agricultural applications, industrial and fertilizer grade ammonium nitrate (AN), urea ammonium nitrate (UAN), sulfuric acids, nitric acids in various concentrations, nitrogen solutions, diesel exhaust fluid (DEF) and various other products. The Company�� Chemical Business is a supplier to chemical and industrial companies. Its other products include anhydrous ammonia, ammonium nitrate ammonia solution for agricultural applications, blended and regular nitric acid, mixed nitrating acids, and industrial grade AN and solutions for the mining industry. The Company sells hese agricultural products to farmers, ranchers, fertilizer dealers and distributors primarily in the ran! ch land and grain production markets in the United States. The Company�� Chemical Business establishes long-term relationships with wholesale agricultural distributors and retailers and also sells directly to agricultural end-users through its network of wholesale and retail distribution centers. The Company�� Chemical Business manufactures and sells industrial acids and other chemical products primarily to the polyurethane, paper, fibers, fuel additives, emission control, and electronics industries. Its Chemical Business is also a niche market supplier of industrial and high purity ammonia for many specialty applications, including the reduction of air emissions from power plants.
Climate Control Business
The Company�� Climate Control Business manufactures and sells a range of standard and custom designed geothermal and water source heat pumps and hydronic fan coils, as well as custom air handlers and modular chiller systems, including modular geothermal chillers and simultaneous heating and cooling modules. These products are for use in commercial/institutional and residential HVAC systems. Its products are installed in some of the commercial/institutional developments in the United States, including the Prudential Tower, Rockefeller Plaza, Trump Tower, Time Warner Center and many others. In addition, it has presence in the lodging sector with installations in numerous Hyatt, Marriott, Four Seasons, Starwood, Ritz Carlton and Hilton hotels, among others. Its Climate Control Business manufactures and distributes its products from seven facilities located in Oklahoma City, Oklahoma. The Company also provides geothermal heat pumps in residential and commercial/institutional applications. Its products are sold to the commercial/institutional markets, as well as single and multi-family residential new construction, renovation and replacements. The Company is a provider of hydronic fan coils targeting commercial and institutional markets. It manufactures its products in many! sizes an! d configurations, as required by the purchaser, to fit the space and capacity requirements of hotels, motels, schools, hospitals, apartment buildings, office buildings and other commercial/institutional or residential structures. The Climate Control Business sells its products primarily to mechanical contractors, original equipment manufacturers (OEMs) and distributors. Its Climate Control Business market includes commercial/institutional and residential new building construction, renovation of existing buildings and replacement of existing systems.
The Company competes with Agrium, CF Industries, Coffeyville Resources, Dyno Nobel, Koch, Potash Corporation, Yara International, Carrier, Trane, Nortek, McQuay, and Bosch.
Advisors' Opinion:- [By Roberto Pedone]
LSB Industries (LXU) manufactures and sells geothermal and water source heat pumps and air handling products and chemical products. This stock closed up 4.6% at $33.72 in Friday's trading session.
Friday's Volume: 543,000
Three-Month Average Volume: 147,784
Volume % Change: 252%From a technical perspective, LXU ripped higher here right above some near-term support at $31.45 and back above its 50-day moving average of $32.51 with heavy upside volume. This stock also flirted with its 200-day moving average at $35.22, before closing just below that level at $33.72.
Traders should now look for long-biased trades in LXU as long as it's trending above its 50-day at $32.51 and then once it sustains a move or close above its 200-day at $35.22 to Friday's high of $36 with volume that's near or above 147,784 shares. If we get that move soon, then LXU will set up to re-test or possibly take out its next major overhead resistance levels at $40.37 to $42.79.
- [By James E. Brumley]
With a market cap of only $893 million, it's not like LSB Industries, Inc. (NYSE:LXU) is the kind of company that garners a ton of attention. On the other hand, over the past several months, LXU has garnered far more attention than it likely wanted. The turbulence seems to be mostly behind it, however, and though the stock is now overbought thanks to the proverbial clearing of the dust, for long-haul investors, LSB Industries may be worth a closer look.
10 Best Chemical Stocks For 2014: Wacker Chemie AG (WCH)
Wacker Chemie AG is a Germany-based company engaged in chemical industry. The Company operates through four business segments: WACKER SILICONES, which produces silicone products, ranging from silanes through silicone fluids, emulsions, elastomers, sealants and resins to pyrogenic silicas; WACKER POLYMERS, which offers a range of polymeric binders and additives; WACKER POLYSILICON, which provides polysilicon, and WACKER BIOSOLUTIONS, which is the life science division of the Company, offers solutions and products for the food, pharmaceutical and agrochemical industries. The Company offers its products for a range of sectors, including consumer goods, food, pharmaceuticals, textiles and the solar, electrical/electronics, basic-chemical industries, medical technology, biotech and mechanical engineering, automotive and construction. The Company also supplies silicon wafers to the semiconductor industry. Advisors' Opinion:- [By Jonathan Morgan]
Wacker Chemie AG (WCH), the fourth-largest producer of polysilicon, jumped 9 percent to 56.22 euros, its largest increase since December.
Banks DeclineCommerzbank slumped 3.7 percent to 8.18 euros, for the biggest loss on the benchmark index.
10 Best Chemical Stocks For 2014: Cytec Industries Inc (CYT)
Cytec Industries Inc/De/, formerly Cytec Industries Inc., incorporated on December 17, 1993, is a specialty chemicals and materials company focused on developing, manufacturing and selling value-added products. Its products serve a diverse range of end markets, including aerospace and industrial materials, mining and plastics. The Company has four business segments: Engineered Materials, Umeco, In-Process Separation and Additive Technologies. Engineered Materials segment principally includes advanced composites, carbon fiber, and structural film adhesives. The Umeco segment includes composite and process materials, primarily for the aerospace and defense, wind energy, automotive, recreation and other industrial segments. The In Process Separation segment includes mining chemicals and phosphines. The Additive Technologies segment includes polymer additives, specialty additives and formulated resins. On July 20, 2012, the Company acquired Umeco plc.
Engineered Materials
The Engineered Materials segment is a global provider of technologically advanced materials for aerospace, high-performance industrial and other extreme-demand markets. Its primary product lines are advanced aerospace composites and structural adhesives, High performance industrial materials and Carbon fibers. Its major products in the advanced aerospace composites include aerospace- qualified prepregs, resin infusion systems and structural/surfacing adhesives. Its principal applications include commercial airliners, regional and business jets, military aircraft, including rotorcraft, satellites and launch vehicles. The products in the high performance industrial materials include Industrial-grade prepregs, resin infusion systems and structural/surfacing adhesives. Its applications include high performance automotive, defense, tooling and alternative energy. The products in carbon fibers include high performance fiber carbon fibers. Its applications include reinforcements for advanced aerospace and industrial c! omposites.
The Company is a supplier to the F-35 Joint Strike Fighter and F-18 fighter jet programs. It is also a supplier for the business and regional jet market, supporting programs, such as Bombardier�� CSeries and LearJet85. It also manufactures specialty adhesive forms for complex composites assemblies, such as honeycomb and sandwich structures and special surfacing films to provide aircraft lightning strike protection. It manufactures and sells various high-performance grades of both polyacrylonitrile (PAN) type and pitch type carbon fibers used as a reinforcement material for aerospace and other extreme-demand and high-performance composites.
The Company�� High Performance Industrial Materials (HPIM) product line strategy is to leverage its composites, adhesives and resin technologies across multiple industrial markets. The Company supplies composites and adhesives to a spectrum of markets, such as high performance and luxury low-rate serial automotive, defense, and alternative energy.
Umeco
Umeco�� primary product lines are High performance composites structural materials/solutions and Composite process materials/solutions. Its major products in the High performance composites structural materials/solutions include Aerospace-qualified prepregs, Industrial-grade prepreg. Its principal applications include large commercial airliners, military aircraft, high performance automotive, defense, tooling, recreation, industrial and alternative energy. The products in Composite process materials/solutions include Process materials/solutions including vacuum bagging, release films and sealant tapes. Its principal applications include large commercial airliners, military aircraft, high performance automotive, defense, tooling, recreation, industrial and alternative energy and Process materials for the forming, infusion, curing of composite structures.
The Company�� structural materials product line includes the development, manufa! cturing a! nd supply of advanced composite materials. It specializes in the manufacture of composite materials for a range of industries such as aerospace and defense, marine, motor sport and automotive, construction, wind energy, and recreation.
In-Process Separation
The In-Process Separation segment includes mining chemicals and phosphines. The Company�� mining chemicals product line include flotation promoters, collectors, frothers, dispersants and depressants, solvent extractants, flocculants, filter and dewatering aids, antiscalants, and defoamers . Its principal applications include mineral separation and processing for copper, alumina, cobalt, nickel, and other minerals. Its Phosphines include flame retardants, catalyst ligands, high purity phosphine gas and biocides.
Its phospine based specialty products are used primarily in the pharmaceutical, chemical and electronic manufacturing, and fumigation. Its patented MaxHT antiscalant is sold for suppressing sodalite scale formation. Its phosphine specialties are utilized for a variety of applications. It is a supplier of ultra- high purity phosphine gas, used in semiconductor manufacturing and light emitting diode applications, various phosphine derivative products, including phosphonium salts used in pharmaceutical catalysts and biocides. Included in the phosphine line are organo phosphorus compounds. The compounds are used primarily as intermediates and catalyst ligands for organic and chemical synthesis in the pharmaceutical and chemical industries.
Additive Technologies
The Additive Technologies segment includes polymer additives specialty additives and Formulated resins. Polymer additives include ultraviolet light stabilizers and absorbers, high performance antioxidants and antistatic agents. Its applications include plastics, coatings, and fibers for: agricultural films, automotive parts, architectural lighting, housewares, packaging, outdoor furniture, sporting goods, toys and apparel.! Specialt! y additives include surfactants, specialty monomers, resin amines, and PTZ Phenothiazine. Its Formulated resins are used in for bonding or sealing of electrical and electronic components.
The Company markets its Additive Technologies chemicals through specialized sales and technical service staffs for each of its product lines. Sales are usually made directly to customers and through distributors to smaller customers. The Company is a global supplier to the plastics industry of specialty additives, which protect plastics from the ultraviolet radiation of sunlight and from oxidation. It is a global supplier of sulfosuccinate surfactants, Docusate sodium, and PTZ phenothiazine. Sulfosuccinate surfactants and acrylamide-based specialty monomers products are used in emulsion polymers, paints, paper coatings, printing inks, and other diverse customer applications. Docusate is a pharmaceutical grade product used as both an active ingredient and excipient/formulating aid. PTZ phenothiazine is primarily used as an acrylic acid, acrylic ester and methacrylate monomer stabilizer.
Advisors' Opinion:- [By Stoyan Bojinov]
The New Jersey-based specialty chemicals maker, Cytec Industries (CYT), announced third quarter operating results after the closing bell on Thursday that topped analysts’ estimates.
Cytec Industries managed to rake in revenues of $464 million last quarter, falling short of the projected $482.61 million figure. The company did manage to beat the mark, however, in terms of earnings per share; in the third quarter Cytec generated EPS of $1.32, beating the expected EPS of $1.34 by two pennies.
Looking back, the most recent quarterly results are well above the 91 cents EPS seen in Q3 exactly one year ago. Looking ahead, the company expects FY2013 EPS of $4.70-$4.80 compared to the consensus of $4.82.
Cytec Industries shares rallied higher on Thursday, gaining 0.58% on the day. The stock is up 25% YTD.
10 Best Chemical Stocks For 2014: PPG Industries Inc.(PPG)
PPG Industries, Inc. manufactures and supplies protective and decorative coatings. The company offers coatings products for automotive and commercial transport/fleet repair and refurbishing, specialty coatings for signs, and light industrial coatings; and sealants, coatings, and technical cleaners/transparencies for commercial, military, regional jet, general aviation aircraft, and transparent armor for military land vehicles. It also provides coatings and finishes for the protection of metals and structures to metal fabricators, heavy duty maintenance contractors, and manufacturers of ships, bridges, rail cars, and shipping containers; and coatings to painting and maintenance contractors. In addition, PPG sells industrial and automotive coatings to manufacturing companies; adhesives and sealants for the automotive industry; metal pretreatments and related chemicals; and coatings and inks for aerosol, food, and beverage containers. Further, it supplies lenses, sunlenses, a nd optical lens materials; amorphous precipitated silicas for tire and battery separator markets; and Teslin substrate used in radio frequency identification tags and labels, e-passports, drivers? licenses, and identification cards applications. Additionally, PPG offers chlor-alkali and derivative products, such as chlorine, caustic soda, vinyl chloride monomer, chlorinated solvents, calcium hypochlorite, ethylene dichloride, hydrochloric acid, and phosgene derivatives to chemical processing, rubber and plastics, paper, minerals, metals, and water treatment industries. It also produces flat glass and continuous-strand fiber glass for commercial and residential construction, wind energy, energy infrastructure, transportation, and electronics industries. PPG sells its products through company-owned stores, home centers, paint dealers, and independent distributors, as well as directly to customers worldwide. The company was founded in 1883 and is headquartered in Pittsburgh, Pe nnsylvania.
Advisors' Opinion:- [By Lawrence Meyers]
VAL stock trades at about 18�timesFY14 estimates of $4.08. Even accounting for the 1.4% yield, it�� a tad bit pricey at 14% long-term EPS growth. But let�� look at competitors. PPG Industries (PPG) trades at 21�times�earnings on 11% long-term growth. Sherwin-Williams (SHW) trades at 24x earnings on 14.6% long-term growth. Akzo Nobel (AKZOY) trades at 16 times earnings on 11% growth.
10 Best Chemical Stocks For 2014: BioAmber Inc (BIOA)
BioAmber Inc. (BioAmber), incorporated on October 15, 2008, is a chemical company. The Company manufactures its bio-succinic acid in a facility using a commercial scale 350,000 liter fermenter in Pomacle, France. During the year ended December 31, 2011, the Company produced 487,000 pounds, or 221 metric tons, of bio-succinic acid at this facility. Succinic acid is used to manufacture a range of products used every day, including plastics, food additives and personal care products, and can also be used as a building block for a range of derivative chemicals. The Company produces and sells bio-succinic acid using its process for petroleum-derived succinic acid. It also has additional bio-based products under development with partners including bio-succinic acid derivatives, such as BDO, and applications of bio-succinic acid, such as plasticizers, polyurethanes and de-icing solutions. During 2011, the Company created a wholly owned subsidiary, BioAmber International, S.a.r.l.
The Company develops bio-succinic acid for a range of markets, such as personal care products and food additives, plasticizers, polyurethanes, resins and coatings. The applications for bio-succinic acid include plasticizers, polyurethanes, personal care products, de-icing solutions, resins and coatings, food additives, lubricants and other products. Plasticizers are organic esters that are primarily used to make flexible polyvinyl chloride. Adipic acid is used in polyester polyols, which are used to make polyurethanes. Polyurethanes are used in, among other things, soles for footwear, molded foams for automotive applications, such as car seats and arm rests, and non-foam applications such as coatings, adhesives and sealants. Other applications of bio-succinic acid that are developed and tested by potential customers, which include anti-freeze solutions, solvents, water treatment chemicals and effervescence agents such laundry tablets and bath salts.
The Company competes with Gadiv Petrochemical Industries ! Ltd., Mitsubishi Chemical, DSM, Anqing Hexing Chemical Co Ltd, Anhui Sunsing Chemicals Co., Ltd., Genomatica, Inc., Myriant Corporation and Roquette Freres S.A.
Advisors' Opinion:- [By Maxx Chatsko]
He believes several companies have set the bar precipitously low to start the year despite targeted developments expected to occur before the start of 2014. Watch the following video for his thoughts on potential positive surprises awaiting investors in�Amyris� (NASDAQ: AMRS ) ,�BioAmber� (NYSE: BIOA ) ,�Codexis� (NASDAQ: CDXS ) , and�Solazyme� (NASDAQ: SZYM ) .
- [By Markus Aarnio]
BioAmber (BIOA) is a sustainable chemicals company. Its proprietary technology platform combines industrial biotechnology and chemical catalysis to convert renewable feedstock into chemicals for use in a wide variety of everyday products including plastics, resins, food additives and personal care products.
- [By Matt Jarzemsky]
Out of the 2013 vintage, some of the best performers so far this year have been early-stage healthcare firms like BioAmber Inc.(BIOA), up 86% year-to-date through Thursday, and Kindred Biosciences Inc.(KIN), up 82%. A number of high-flying tech startups have also continued to soar. Cybersecurity firm FireEye Inc.(FEYE) has gained 67% since the start of the year. Online coupon company RetailMeNot Inc.(SALE) is up 48%.